Программа Сервисный Центр
Сортировать новости по: дате новости | популярности | посещаемости | комментариям | алфавиту
SCSI-III External Hi D-Sub (Single-ended)

SCA=Single Connector Attachment

Drive connector: AMP Champ 557613-1 or AMP Champ 557114-5
Cable connector: AMP Champ 2-557103-1 or AMP Champ 2-557101-1


Pin Name Dir Description
1 12V --- +12 VDC
2 12V --- +12 VDC
3 12V --- +12 VDC
4 12V --- +12 VDC
5 3.3V --- +3.3 VDC
6 3.3V --- +3.3 VDC
7 -DB(11) <-> Data Bus 11
8 -DB(10) <-> Data Bus 10
9 -DB(9) <-> Data Bus 9
10 -DB(8) <-> Data Bus 8
11 -I/O --> Input/Output
12 -REQ --> Request
13 -C/D --> Control/Data
14 -SEL <-> Select
15 -MSG --> Message
16 -RST <-> Reset
17 -ACK <-- Acknowledge
18 -BSY <-> Busy
19 -ATN <-- Attention
20 -P_CRCA ?
21 -DB(7) <-> Data Bus 7
22 -DB(6) <-> Data Bus 6
23 -DB(5) <-> Data Bus 5
24 -DB(4) <-> Data Bus 4
25 -DB(3) <-> Data Bus 3
26 -DB(2) <-> Data Bus 2
27 -DB(1) <-> Data Bus 1
28 -DB(0) <-> Data Bus 0
29 -DB(P1) ?
30 -DB(15) <-> Data Bus 15
31 -DB(14) <-> Data Bus 14
32 -DB(13) <-> Data Bus 13
33 -DB(12) <-> Data Bus 12
34 5V --- Ground (Signal)
35 5V --- Ground (Signal)
36 5V CHARGE --- Ground (Signal)
37 SPINDLE SYNC ? Spindle Sync
38 RMT_START ? Remote Start
39 SCSI ID (0) --- SCSI ID Bit 0
40 SCSI ID (2) --- SCSI ID Bit 2
41 12V GROUND --- +12 VDC Ground
42 12V GROUND --- +12 VDC Ground
43 12V GROUND --- +12 VDC Ground
44 MATED 1 ?
45 3.3V CHARGE --- +3.3 VDC Charge
46 GROUND --- Ground
47 SIGNAL RETURN --- Ground (Signal)
48 SIGNAL RETURN --- Ground (Signal)
49 SIGNAL RETURN --- Ground (Signal)
50 SIGNAL RETURN --- Ground (Signal)
51 SIGNAL RETURN --- Ground (Signal)
52 SIGNAL RETURN --- Ground (Signal)
53 SIGNAL RETURN --- Ground (Signal)
54 SIGNAL RETURN --- Ground (Signal)
55 SIGNAL RETURN --- Ground (Signal)
56 SIGNAL RETURN --- Ground (Signal)
57 SIGNAL RETURN --- Ground (Signal)
58 SIGNAL RETURN --- Ground (Signal)
59 SIGNAL RETURN --- Ground (Signal)
60 SIGNAL RETURN --- Ground (Signal)
61 SIGNAL RETURN --- Ground (Signal)
62 SIGNAL RETURN --- Ground (Signal)
63 SIGNAL RETURN --- Ground (Signal)
64 SIGNAL RETURN --- Ground (Signal)
65 SIGNAL RETURN --- Ground (Signal)
66 SIGNAL RETURN --- Ground (Signal)
67 SIGNAL RETURN --- Ground (Signal)
68 SIGNAL RETURN --- Ground (Signal)
69 SIGNAL RETURN --- Ground (Signal)
70 SIGNAL RETURN --- Ground (Signal)
71 SIGNAL RETURN --- Ground (Signal)
72 SIGNAL RETURN --- Ground (Signal)
73 SIGNAL RETURN --- Ground (Signal)
74 MATED 2 ?
75 5V GROUND --- +5 VDC Ground
76 5V GROUND --- +5 VDC Ground
77 ACTIVE LED OUT ?
78 DLYD_START ?
79 SCSI ID (1) --- SCSI ID Bit 1
80 SCSI ID (3) --- SCSI ID Bit 3

 

5: RESERVED/NC 6: RESERVED/NC 20: -DB(P0) 36: 5 VOLT 44: 12 V GROUND 45: RESERVED/NC 46: RESERVED/NC 74: 5 V GROUND

Note: Direction is Device relative Bus (other Devices).

 
SCSI-II External Hi D-Sub (Differential)

50 PIN HI-DENSITY D-SUB FEMALE (at the controller & devices).
50 PIN HI-DENSITY D-SUB MALE (To the cable).

50 PIN HI-DENSITY D-SUB FEMALE at the controller & devices.
50 PIN HI-DENSITY D-SUB MALE at the cable.


Pin Name Dir Description
01 GND --- Ground
02 +DB0 <-> +Data Bus 0
03 +DB1 <-> +Data Bus 1
04 +DB2 <-> +Data Bus 2
05 +DB3 <-> +Data Bus 3
06 +DB4 <-> +Data Bus 4
07 +DB5 <-> +Data Bus 5
08 +DB6 <-> +Data Bus 6
09 +DB7 <-> +Data Bus 7
10 +DBP <-> +Data Bus Parity (odd Parity)
11 DIFFSENS ? ???
12 res - Reserved
13 TERMPWR <-> Termination Power
14 res - Reserved
15 +ATN <-- +Attention
16 GND --- Ground
17 +BSY <-> +Bus is busy
18 +ACK <-- +Acknowledge
19 +RST <-> +Reset
20 +MSG --> +Message
21 +SEL <-> +Select
22 +C/D --> +Control or Data
23 +REQ --> +Request
24 +I/O --> +In/Out
25 GND --- Ground
26 GND --- Ground
27 -DB0 <-> -Data Bus 0
28 -DB1 <-> -Data Bus 1
29 -DB2 <-> -Data Bus 2
30 -DB3 <-> -Data Bus 3
31 -DB4 <-> -Data Bus 4
32 -DB5 <-> -Data Bus 5
33 -DB6 <-> -Data Bus 6
34 -DB7 <-> -Data Bus Parity7
35 -DBP <-> -Data Bus Parity (odd Parity)
36 GND --- Ground
37 res - Reserved
38 TERMPWR <-> Termination Power
39 res - Reserved
40 -ATN <-- -Attention
41 GND --- Ground
42 -BSY <-> -Bus is busy
43 -ACK <-- -Acknowledge
44 -RST <-> -Reset
45 -MSG --> -Message
46 -SEL <-> -Select
47 -C/D --> -Control or Data
48 -REQ --> -Request
49 -I/O --> -In/Out
50 GND --- Ground

Note: Direction is Device relative Bus (other Devices).

 
SCSI-II External Hi D-Sub (Single-ended)

50 PIN HI-DENSITY D-SUB FEMALE (at the controller & devices).
50 PIN HI-DENSITY D-SUB MALE (To the cable).

50 PIN HI-DENSITY D-SUB FEMALE at the controller & devices.
50 PIN HI-DENSITY D-SUB MALE at the cable.


Pin Name Dir Description
1-25 GND --- Ground
26 DB0 <-> Data Bus 0
27 DB1 <-> Data Bus 1
28 DB2 <-> Data Bus 2
29 DB3 <-> Data Bus 3
30 DB4 <-> Data Bus 4
31 DB5 <-> Data Bus 5
32 DB6 <-> Data Bus 6
33 DB7 <-> Data Bus 7
34 PARITY <-> Data Parity (odd Parity)
35 GND --- Ground
36 GND --- Ground
37 GND --- Ground
38 TMPWR <-> Termination Power
39 GND --- Ground
40 GND --- Ground
41 /ATN <-- Attention
42 n/c - Not connected
43 /BSY <-> Busy
44 /ACK <-- Acknowledge
45 /RST <-> Reset
46 /MSG --> Message
47 /SEL <-> Select
48 /C/D --> Control/Data
49 /REQ --> Request
50 /I/O --> Input/Output

Note: Direction is Device relative Bus (other Devices).

 
SCSI-III External Hi D-Sub (Differential)

68 PIN HI-DENSITY D-SUB FEMALE (at the controller & devices).
68 PIN HI-DENSITY D-SUB MALE (To the cable).

68 PIN HI-DENSITY D-SUB FEMALE at the controller & devices.
68 PIN HI-DENSITY D-SUB MALE at the cable.


Pin Name Dir Description
1 +DB12 <-> Data Bus 12
2 +DB13 <-> Data Bus 13
3 +DB14 <-> Data Bus 14
4 +DB15 <-> Data Bus 15
5 +DPB1 <-> Data Parity (odd Parity)
6 GND --- Ground
7 +DB0 <-> Data Bus 0
8 +DB1 <-> Data Bus 1
9 +DB2 <-> Data Bus 2
10 +DB3 <-> Data Bus 3
11 +DB4 <-> Data Bus 4
12 +DB5 <-> Data Bus 5
13 +DB6 <-> Data Bus 6
14 +DB7 <-> Data Bus 7
15 +DPB <-> Data Parity (odd Parity)
16 DIFFSENSE ? Diff Sense?
17 TERMPWR <-> Termination Power
18 TERMPWR <-> Termination Power
19 res --- reserved
20 +ATN <-- Attention
21 GND --- Ground
22 +BSY <-> Busy
23 +ACK <-- Acknowledge
24 +RST <-> Reset
25 +MSG --> Message
26 +SEL <-> Select
27 +C/D --> Control/Data
28 +REQ --> Request
29 +I/O --> Input/Output
30 GND --- Ground
31 +DB8 <-> Data Bus 8
32 +DB9 <-> Data Bus 9
33 +DB10 <-> Data Bus 10
34 +DB11 <-> Data Bus 11
35 -DB12 <-> Data Bus 12
36 -DB13 <-> Data Bus 13
37 -DB14 <-> Data Bus 14
38 -DB15 <-> Data Bus 15
39 -DPB1 <-> Data Parity (odd Parity)
40 GND --- Ground
41 -DB0 <-> Data Bus 0
42 -DB1 <-> Data Bus 1
43 -DB2 <-> Data Bus 2
44 -DB3 <-> Data Bus 3
45 -DB4 <-> Data Bus 4
46 -DB5 <-> Data Bus 5
47 -DB6 <-> Data Bus 6
48 -DB7 <-> Data Bus 7
49 -DPB <-> Data Parity (odd Parity)
50 GND --- Ground
51 TERMPWR <-> Termination Power
52 TERMPWR <-> Termination Power
53 res --- reserved
54 -ATN <-- Attention
55 GND --- Ground
56 -BSY <-> Busy
57 -ACK <-- Acknowledge
58 -RST <-> Reset
59 -MSG --> Message
60 -SEL <-> Select
61 -C/D --> Control/Data
62 -REQ --> Request
63 -I/O --> Input/Output
64 GND --- Ground
65 -DB8 <-> Data Bus 8
66 -DB9 <-> Data Bus 9
67 -DB10 <-> Data Bus 10
68 -DB11 <-> Data Bus 11

Note: Direction is Device relative Bus (other Devices).

 
SCSI External D-Sub (PC/Amiga/Mac)

25 PIN D-SUB FEMALE (at the controller)
25 PIN D-SUB MALE (at the cable)

25 PIN D-SUB FEMALE at the controller.
25 PIN D-SUB MALE at the cable.

Pin Name Dir Description
1 /REQ --> Request
2 /MSG --> Message
3 --> Input/Output
4 /RST <-> Reset
5 /ACK <-- Acknowledge
6 BSY <-> Busy
7 GND --- Ground
8 DB0 <-> Data Bus 0
9 GND --- Ground
10 DB3 <-> Data Bus 3
11 DB5 <-> Data Bus 5
12 DB6 <-> Data Bus 6
13 DB7 <-> Data Bus 7
14 GND --- Ground
15 --> Control/Data
16 GND --- Ground
17 /ATN <-- Attention
18 GND --- Ground
19 /SEL <-> Select
20 PARITY <-> Data Parity
21 DB1 <-> Data Bus 1
22 DB2 <-> Data Bus 2
23 DB4 <-> Data Bus 4
24 GND --- Ground
25 TMPWR <-> Termination Power

Note: Direction is Device relative Bus (other Devices).

 
SCSI External IBM Burndy

Special invention by IBM for use on IBM RS/6000 and IBM http://www.bdn.odessa.ua/HWB/p>

60 PIN BURNDY (at ???)

60 PIN BURNDY (C-60) at ???

Pin Name Dir Description
1 GND --- Ground
2 DB0 <-> Data Bus 0
3 GND --- Ground
4 DB1 <-> Data Bus 1
5 GND --- Ground
6 DB2 <-> Data Bus 2
7 GND --- Ground
8 DB3 <-> Data Bus 3
9 GND --- Ground
10 DB4 <-> Data Bus 4
11 GND --- Ground
12 DB5 <-> Data Bus 5
13 GND --- Ground
14 DB6 <-> Data Bus 6
15 GND --- Ground
16 DB7 <-> Data Bus 7
17 GND --- Ground
18 DPB <-> Data Parity (odd Parity)
19 GND --- Ground
20 GND --- Ground
21 GND --- Ground
22 GND --- Ground
23 GND --- Ground
24 GND --- Ground
25   Not connected
26 TERMPWR <-> Termination Power
27 GND --- Ground
28 GND --- Ground
29 GND --- Ground
30 GND --- Ground
31 GND --- Ground
32 /ATN <-- Attention
33 GND --- Ground
34 GND --- Ground
35 GND --- Ground
36 /BSY <-> Busy
37 GND --- Ground
38 /ACK <-- Acknowledge
39 GND --- Ground
40 /RST <-> Reset
41 GND --- Ground
42 /MSG --> Message
43 GND --- Ground
44 /SEL <-> Select
45 GND --- Ground
46 http://www.bdn.odessa.ua/HWB/td> --> Control/Data
47 GND --- Ground
48 /REQ --> Request
49 GND --- Ground
50 http://www.bdn.odessa.ua/HWB/td> --> Input/Output
51 GND --- Ground
52 res   Reserved
53 res   Reserved
54 res   Reserved
55 res   Reserved
56 res   Reserved
57 res   Reserved
58 res   Reserved
59 res   Reserved
60 res   Reserved

Note: Direction is Device relative Bus (other Devices).

 
Novell and Procomp External SCSI

This interface is nowadays considered obsolete.

37 PIN D-SUB FEMALE (at the controller)

37 PIN D-SUB FEMALE at the controller.


Pin Name Dir Description
1 GND --- Ground
2 GND --- Ground
3 GND --- Ground
4 GND --- Ground
5 GND --- Ground
6 GND --- Ground
7 GND --- Ground
8 GND --- Ground
9 GND --- Ground
10 GND --- Ground
11 GND --- Ground
12 GND --- Ground
13 GND --- Ground
14 GND --- Ground
15 GND --- Ground
16 GND --- Ground
17 GND --- Ground
18 GND --- Ground
19 TERMPWR <-> Termination Power
20 /DB0 <-> Data Bus 0
21 /DB1 <-> Data Bus 1
22 /DB2 <-> Data Bus 2
23 /DB3 <-> Data Bus 3
24 /DB4 <-> Data Bus 4
25 /DB5 <-> Data Bus 5
26 /DB6 <-> Data Bus 6
27 /DB7 <-> Data Bus 7
28 /DBP <-> Data Bus Parity
29 /ATN <-- Attention
30 /BSY <-> Busy
31 /ACK <-- Acknowledge
32 /RST <-> Reset
33 /MSG --> Message
34 /SEL <-> Select
35 /C/D --> Control/Data
36 /REQ --> Request
37 /I/O --> Input/Output

Note: Direction is Device relative Bus (other Devices).

 
SCSI External Centronics 50 (Differential)

50 PIN CENTRONICS FEMALE (at the controller & devices)
50 PIN CENTRONICS MALE (at the cable)

50 PIN CENTRONICS FEMALE at the controller & devices.
50 PIN CENTRONICS MALE at the cable.


Pin Name Dir Description
01 GND --- Ground
02 +DB0 <-> +Data Bus 0
03 +DB1 <-> +Data Bus 1
04 +DB2 <-> +Data Bus 2
05 +DB3 <-> +Data Bus 3
06 +DB4 <-> +Data Bus 4
07 +DB5 <-> +Data Bus 5
08 +DB6 <-> +Data Bus 6
09 +DB7 <-> +Data Bus 7
10 +DBP <-> +Data Bus Parity (odd Parity)
11 DIFFSENS ? ???
12 res - Reserved
13 TERMPWR <-> Termination Power
14 res - Reserved
15 +ATN <-- +Attention
16 GND --- Ground
17 +BSY <-> +Bus is busy
18 +ACK <-- +Acknowledge
19 +RST <-> +Reset
20 +MSG --> +Message
21 +SEL <-> +Select
22 +C/D --> +Control or Data
23 +REQ --> +Request
24 +I/O --> +In/Out
25 GND --- Ground
26 GND --- Ground
27 -DB0 <-> -Data Bus 0
28 -DB1 <-> -Data Bus 1
29 -DB2 <-> -Data Bus 2
30 -DB3 <-> -Data Bus 3
31 -DB4 <-> -Data Bus 4
32 -DB5 <-> -Data Bus 5
33 -DB6 <-> -Data Bus 6
34 -DB7 <-> -Data Bus Parity7
35 -DBP <-> -Data Bus Parity (odd Parity)
36 GND --- Ground
37 res - Reserved
38 TERMPWR <-> Termination Power
39 res - Reserved
40 -ATN <-- -Attention
41 GND --- Ground
42 -BSY <-> -Bus is busy
43 -ACK <-- -Acknowledge
44 -RST <-> -Reset
45 -MSG --> -Message
46 -SEL <-> -Select
47 -C/D --> -Control or Data
48 -REQ --> -Request
49 -I/O --> -In/Out
50 GND --- Ground

Note: Direction is Device relative Bus (other Devices).

 
SCSI External Centronics 50 (Single-ended)

50 PIN CENTRONICS FEMALE (at the controller & devices)
50 PIN CENTRONICS MALE (at the cable)

50 PIN CENTRONICS FEMALE at the controller & devices.
50 PIN CENTRONICS MALE at the cable.


Pin Name Dir Description
1-25 GND --- Ground
26 DB0 <-> Data Bus 0
27 DB1 <-> Data Bus 1
28 DB2 <-> Data Bus 2
29 DB3 <-> Data Bus 3
30 DB4 <-> Data Bus 4
31 DB5 <-> Data Bus 5
32 DB6 <-> Data Bus 6
33 DB7 <-> Data Bus 7
34 PARITY <-> Data Parity (odd Parity)
35 GND --- Ground
36 GND --- Ground
37 GND --- Ground
38 TMPWR <-> Termination Power
39 GND --- Ground
40 GND --- Ground
41 /ATN <-- Attention
42 n/c - Not connected
43 /BSY <-> Busy
44 /ACK <-- Acknowledge
45 /RST <-> Reset
46 /MSG --> Message
47 /SEL <-> Select
48 /C/D --> Control/Data
49 /REQ --> Request
50 /I/O --> Input/Output

Note: Direction is Device relative Bus (other Devices).

 
SCSI External D-Sub (Future Domain)

Seems to be available on some Future Domain SCSI-controllers only.

25 PIN D-SUB FEMALE (at the controller)
25 PIN D-SUB MALE (at the cable)

25 PIN D-SUB FEMALE at the controller.
25 PIN D-SUB MALE at the cable.

Pin Name Dir Description
1 GND --- Ground
2 DB1 <-> Data Bus 1
3 DB3 <-> Data Bus 3
4 DB5 <-> Data Bus 5
5 DB7 <-> Data Bus 7
6 GND --- Ground
7 /SEL <-> Select
8 GND --- Ground
9 TMPWR <-> Termination Power
10 /RST <-> Reset
11 --> Control/Data
12 --> Input/Output
13 GND --- Ground
14 DB0 <-> Data Bus 0
15 DB2 <-> Data Bus 2
16 DB4 <-> Data Bus 4
17 DB6 <-> Data Bus 6
18 PARITY <-> Data Parity
19 GND --- Ground
20 /ATN <-- Attention
21 /MSG --> Message
22 /ACK <-- Acknowledge
23 BSY <-> Busy
24 /REQ --> Request
25 GND --- Ground

Note: Direction is Device relative Bus (other Devices).

 
 

 
 
 
Обратная связь

Наши партнеры

 

Опросы

Есть ли справедливость в жизни?
Конечно есть, уверен!
Вроде как должна быть, но...
Затрудняюсь ответить...
Какая справедливость? О чем Вы?
Эх.., нет правды на свете!

 

Облако тегов

Требуется для просмотраFlash Player 9 или выше.

Показать все теги
 

Календарь публикаций

«    Ноябрь 2018    »
ПнВтСрЧтПтСбВс
 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
 
 

Архив новостей

Сентябрь 2017 (4)
Август 2017 (36)
Июль 2017 (32)
Июнь 2017 (42)
Май 2017 (45)
Апрель 2017 (47)
 
Наверх Сервисные мануалы Даташиты Ремонт LCD, ЖК телевизоров LG Samsung Скрипт программы "Сервисный центр"